How to Replace Regulator from Weber Q1200

The Weber Q1200 is an excellent grill for those looking for a grill that will last them many years. It has been created to be highly long-lasting and easy to use, but occasionally things happen which require some maintenance. One of the most usual problems is when the regulator on the Weber grill q1200 vs 2200 needs replacement. In this blog post, we’ll cover how you can fix your barbecue regulator quickly and easily using our step-by-step guide.

Remove the hose and regulator assembly

The first thing you order to do is turn off the propane tank’s valve. You mustn’t try and twist the knob on the regulator while it’s still connected to your grill. Doing so could cause damage to yourself or harm your grill, leading to further replacement charges. Once you’ve turned this off, you need to disconnect the hose from the regulator. The best way of doing this is by using a pair of pliers or an adjustable wrench to not damage the connector’s threads.

Once this is removed, twist and remove the regulator assembly from your grill’s burner tube. You should find that there might be some residual fuel still present inside the hose, so it’s a good idea to twist and release the gas slowly before deleting it.

Check for cracks or other damage

Now that your barbecue regulator has been removed from the burner tube, you should check over both parts thoroughly to make sure they don’t have any cracks or other damage. The regulator is especially susceptible to damage from heat and the ingestion of hot charcoal pieces, so check it carefully using a magnifying glass if necessary.

If you find cracks in either part of your regulator assembly, don’t attempt to fix them yourself. Instead, take it along to a professional barbecue repair specialist who will be able to replace it for you. This is especially true if you find cracks in your regulator’s flange.

Replace the flame arrestor and rings

You’ll typically need to replace the flame arrestor and the three stainless steel rings if they’re damaged or missing. The flame arrestor can be found on top of your barbecue’s burner tube, and the rings are located inside the regulator’s housing. All three of them should be replaced simultaneously, and you can get a set with our spare parts for Weber Q1200.

Assemble the new regulator

To assemble your new barbecue regulator, insert every three rings into its correct position in the regulator’s housing. When complete, insert the stainless steel cylinder into its slot and screw on the whole component to the burner tube. This is typically done by finger-tightening, but you can use a wrench or an adjustable spanner if it doesn’t fit.

Buy Weber 51010001 Q1200 Liquid Propane Grill, Black Online in Poland.  B00RFXS1Z6

Once your regulator is attached to the grill’s burner tube, replace the hose before turning on your propane tank’s valve. This will permit you to test out your regulator and check the fuel supply before finally using it for cooking some delicious food on your barbecue.

If you’re still having issues with your Weber Q1200 after replacing its regulator, take a look at our other blog post for more valuable tips and tricks. If you need further assistance, you can contact us directly through our website.

Install the hose and regulator to your barbecue

The next point you want to do is attach the hose to your controller. Use a wrench or adjustable spanner to tighten it, but not too much as this could damage the tube’s connector. Ensure that the propane tank’s valve is turned off before twisting it on – doing so could cause injury or damage to your grill.

Now that you’ve got your regulator and hose attached, twist and remove the entire assembly from your grill’s burner tube. You should find that there might be some residual fuel still present inside the hose, so it’s a good idea to twist and release this slowly before obliterating it.

Check for cracks or other damage

It’s good practice to check both the regulator and hose for any cracks or other damage. This is especially true if you suspect that your barbecue’s regulator has come into contact with high heat, as this could cause permanent damage.

If any of these parts are damaged in any way, don’t try to fix them yourself – instead, take them along to a professional barbecue repair specialist who will be ready to restore them for you in no chance at all.


It can be challenging to find the parts for your weber q1200 grill, but with some help from the experts at BBQ Grill Parts Superstore, you’ll have it running like new in no time. We carry a wide variety of replacement regulators and other pieces that will fit just right on your Weber Q 1200 grill if you need any more information about finding or replacing the regulator from weber q1200.